Induction plasma spheroidization of ZrB2-SiC powders for plasma-spray coating

To improve the microstructure and properties of ZrB₂-SiC (ZrB₂-30?vol%SiC, Z7S3) coatings, a facile synthesis route involving induction plasma spheroidization (IPS) has been proposed, and the morphologies, particle size distributions, and phase compositions of the feedstock powders were analysed by scanning electron microscopy and focused ion beam techniques. The obtained results showed that the surfaces of the produced powders contained eutectic-like and granular zones. Owing to the existence of a temperature gradient, the internal microstructure of the IPS-treated powder exhibited a three-layered structure consisting of a ′surface shell′, a ′transition layer′, and a ′porous core′. Additionally, the properties of the IPS-treated samples were compared with those of the spray-dried (SD) powders. The former exhibited good plastic deformation properties, and their single splats contained flattened structures, while the single splats of the SD powder melted only partially retaining some of their original characteristics.     

快速灵敏的LC-MS/MS法测定人血浆中阿莫西林并应用于两种制剂的一致性评价

目的: 建立快速灵敏的LC-MS/MS法测定人血浆中阿莫西林浓度，并用于两种阿莫西林胶囊的一致性评价。方法: 采用岛津公司LCMS-8060型LC-MS/MS仪，以MRM模式测定阿莫西林（m/z 366.00/114.00）的浓度，d4-阿莫西林作内标（m/z 370.10/114.05），离子源为ESI源。色谱柱选用Waters ACQUITY BEH C18（2.1×50 mm，1.7 μm），梯度洗脱。血浆样本加入内标，经甲醇沉淀蛋白后取上清液进样检测。结果: 所建方法经验证，其线性、准确度、精密度、最低定量限、提取回收率、特异性、基质效应、稳定性等各项指标均符合CFDA的指导原则及最新核查标准要求，并较文献报道中的方法有处理简单、灵敏度高、色谱峰形好的优点。结论: 所建方法快速、灵敏，适用于人血浆中阿莫西林浓度的检测。用于一致性评价的样本实测，两种制剂生物等效。     

Catalytic hydrolysis of sodium borohydride solution for hydrogen production using thermal plasma synthesized nickel nanoparticles

In the present study nickel nanoparticles were synthesized by thermal plasma route. In this method we obtained highly crystalline almost spherical nanoparticles with maximum number of particles having size around 30–50 nm. These nanoparticles were thoroughly characterized and employed as a catalyst for hydrogen production using hydrolysis of sodium borohydride (NaBH₄). The effect of initial concentration of NaBH₄, pH and temperature of solution on the rate of hydrogen production was investigated. Nickel nanoparticles exhibits first order reaction with respect to NaBH₄ concentration at elevated temperatures. After hydrolysis, the nickel nanoparticles showed presences of B–O and B–OH species on the nickel surface. The catalyst was found to be stable during 5 sequential cycles of test.     

Fabrication of TiO2 photocatalytic electrode and contamination control with atmospheric pressure O2 plasma jet

In this study, we demonstrate the fabrication of TiO₂ photocatalytic electrode by sol-gel and electrospinning technique. The anatase TiO₂ nanofiber is successfully formed after thermal annealing at 260°C. As-prepared TiO₂ photocatalytic electrode contains surface contamination, which includes a polymer binder such as ethyl cellulose, carbon by carbonization of polyvinylpyrrolidone, and residue polyvinylpyrrolidone. To efficiently remove the surface contaminants from the TiO₂ photocatalytic electrode, we employ an atmospheric-pressure O₂ plasma jet and the exposure time is controlled by the scanning rate. As the results, photodegradation efficiency of methylene blue is significantly enhanced with a scanning rate in the range of 100-500 μm/s and was saturated with a scanning rate in the range of 10-100 μm/s.     

含氢类金刚石涂层在船用柴油机柱塞上的应用

利用磁控溅射和等离子增强化学气相沉积复合技术,以 Cr、WC、石墨为靶材,Ar和C₂H₂为工作气体,在船用低速柴油机柱塞上涂覆了过渡层依次为Cr、WC的含氢类金刚石涂层。结果表明:涂层晶体生长良好,结构连续致密,均未出现分层、开裂及剥离的现象;涂层相对光滑,大幅度提高了柱塞表面的纳米硬度与弹性模量,同时降低了在重柴油环境下的摩擦因数,长时间的台架试验后未涂覆涂层的柱塞表面出现非常明显的平行状沟槽磨痕,而且整体磨损比较严重,而涂覆涂层的柱塞表面磨痕非常窄且浅,数量较少,类金刚石涂层可以明显提高柱塞表面的耐磨损性能。     

退火温度对HA/Ti-24Nb-4Zr复合材料组织与性能的影响

利用放电等离子烧结(SPS)技术制备了HA/Ti-24Nb-4Zr生物复合材料,研究了不同退火温度对复合材料显微组织和力学性能(抗压强度、屈服强度、屈强比、压缩弹性模量)的影响。结果表明,烧结态复合材料主要由β-Ti相、少量初生α-Ti相及HA相组成;随着退火温度的升高,复合材料基体中β-Ti相含量增多且晶粒逐渐长大,针状次生α-Ti相在晶界处和晶内不断析出,HA相结构和含量变化不大;与烧结态相比,不同退火温度处理后的复合材料强度和弹性模量先略微上升后下降,而塑韧性呈不断提高趋势;复合材料在850 ℃退火处理后,抗压强度、屈服强度、屈强比和压缩弹性模量值分别为1507 MPa、1270 MPa、0.84和42 GPa,塑韧性得到明显改善,作为生物医用植入材料具有潜在的应用前景。     

高能量离子束诊断质谱仪的研制及性能表征

本研究开发了一台应用于高能量离子束诊断的直线式飞行时间质谱仪，实现了其与高能真空弧放电离子源的联用。该仪器加速电压30 kV，飞行腔有效飞行距离1.5 m，通过短脉冲离子门精确截取，ICCD高速相机优化聚焦，仪器分辨率优于90 FWHM，对放电过程中产生的等离子体可实现不同时间的离子成分分析。将该方法用于真空弧放电离子源放电过程中离子成分的检测，放电2 μs时，电离成分以气态离子C⁺、O⁺、C²⁺、O²⁺为主；放电6 μs后，除气体成分外，还可以检测到Fe⁺、Cu⁺及其同位素金属离子峰。该仪器能够给出离子源放电产生离子的种类、价态以及相对含量等信息，可实现整个放电过程产生离子成分信息的准确诊断。     

Hypoxia-Responsive Class III Peroxidases in Maize Roots: Soluble and Membrane-Bound Isoenzymes

Flooding induces low-oxygen environments (hypoxia or anoxia) that lead to energy disruption and an imbalance of reactive oxygen species (ROS) production and scavenging enzymes in plants. The influence of hypoxia on roots of hydroponically grown maize (Zea mays L.) plants was investigated. Gene expression (RNA Seq and RT-qPCR) and proteome (LC–MS/MS and 2D-PAGE) analyses were used to determine the alterations in soluble and membrane-bound class III peroxidases under hypoxia. Gel-free peroxidase analyses of plasma membrane-bound proteins showed an increased abundance of ZmPrx03, ZmPrx24, ZmPrx81, and ZmPr85 in stressed samples. Furthermore, RT-qPCR analyses of the corresponding peroxidase genes revealed an increased expression. These peroxidases could be separated with 2D-PAGE and identified by mass spectrometry. An increased abundance of ZmPrx03 and ZmPrx85 was determined. Further peroxidases were identified in detergent-insoluble membranes. Co-regulation with a respiratory burst oxidase homolog (Rboh) and key enzymes of the phenylpropanoid pathway indicates a function of the peroxidases in membrane protection, aerenchyma formation, and cell wall remodeling under hypoxia. This hypothesis was supported by the following: (i) an elevated level of hydrogen peroxide and aerenchyma formation; (ii) an increased guaiacol peroxidase activity in membrane fractions of stressed samples, whereas a decrease was observed in soluble fractions; and (iii) alterations in lignified cells, cellulose, and suberin in root cross-sections.     

喷射成形Al-Zn-Mg-Cu合金挤压态的组织和力学性能

研究了利用喷射成形辅以挤压制备Al-5.72Zn-2.36Mg-1.66Cu合金后优化的组织结构特征和力学性能。结果表明,合金基体组织均匀细化,晶粒形貌趋于圆整,平均晶粒大小达到10 μm左右。当合金的冷却条件通过快速凝固技术改变时,会产生不同程度的固溶强化效果和第二相弥散强化效果,从而改善了合金的整体性能。合金的屈服强度和抗拉强度分别平均提高了20%左右,且伸长率也略有提高。